Your SunGod Sierras™ have been designed so you can quickly and effortlessly replace your lenses to change your look and replace scratched lenses. Your Sierras™ Lens Kits will have come with instructions on how to change the lenses, however if you can't find this please follow the instructions below.
How to remove lenses:
From the inside of the frame, push the bottom edge of the lens out through the front of the frame. The lens will pop out. Repeat with the second lens. Our 2mm polycarbonate lenses are very strong, you may need to apply a fair amount of pressure to remove the lenses.
How to insert lenses:
The lens with the SunGod engraving is the right lens (as you wear them). Fitting the lens into the incorrect side may lead to damage of your frame and will affect optical performance.
From the front of the frame, insert the edge of the lens into the outer edge of the opening (near the hinge). Press the front of the lens near the nosepiece until the lens clicks into place, then work around the bottom of the lens to ensure it is fully inserted. Repeat with the second lens. Our 2mm polycarbonate lenses are very strong, you may need to apply a fair amount of pressure to insert the lenses.